PROJECT CP 35 + MIXPRO 100 mixer spraying set + mortar and E.W.I. lances
Product datasheet 
Options
Advice & Documents
Exploded viewsProduct datasheet
Description
Special big construction sites set, composed with a spraying machine and a sequential mixer.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The mixer is equipped with a double helical paddle on a horizontal arm which ensures a rapid and homogeneous mixing, a water doser, a speed control and a rotation direction reversing function.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The mixer is equipped with a double helical paddle on a horizontal arm which ensures a rapid and homogeneous mixing, a water doser, a speed control and a rotation direction reversing function.
Applications
Wide variety of applicable products including powder and ready-to-use :
With mortar pump and lance: traditional mortars with additives, hydraulic plasters, single-coat paints, lime based plasters, technical & special high-loading fillers, grouting compound...
With E.W.I. pump and lance: glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
With mortar pump and lance: traditional mortars with additives, hydraulic plasters, single-coat paints, lime based plasters, technical & special high-loading fillers, grouting compound...
With E.W.I. pump and lance: glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
Product flow-rate
0 to 40 kg/min
Machine motor power
3 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Power supply
230 V - 16 A - 50 Hz
Machine tank capacity
100 L
Integrated vibrator
yes
Mixer motor
2,2 kW
Mixer tank capacity
100 L
Machine dim. (L x w x h)
115 x 65 x 73 cm
Mixer dim. (L x w x h)
129 x 74 x 126 cm
Machine weight
141 kg
Mixer weight
107 kg
Noise level
94 Lwa
With mortar pump and lance
Pump
MAP 6
Product pressure
0 to 20 bar
Maximum grain size
6 mm
With E.W.I. pump and lance
Pump
MAP 7
Product pressure
0 to 50 bar
Maximum grain size
3 mm
Delivered with
- a Ø32 x 20 m air/product hose
- a Ø32 x 20 m air/product extension hose
- a Ø25 x 5 m air/product easy handling hose
- two suspension straps
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- a carry-case containing:
- a Ø32 x 20 m air/product extension hose
- a Ø25 x 5 m air/product easy handling hose
- two suspension straps
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- an ABS mortar spray lance
- eight spraying nozzles (Ø8, 10, 12, 14, 16, 18, 20 & 22 mm)
- three grouting nozzles (Ø10, 12 & 14 mm)
- two cleaning balls and a tube brush
- a cleaning brush
- an unplugging brush
- a 7 mm Allen key
- a carry-case containing:
- an aluminium-E.W.I. spraying lance
- an air adjustment kit
- a threaded ring for grouting nozzles
- three grouting nozzles Ø 10, 12 & 14 mm
- four spraying nozzles n°6, 7, 8 & 10
- two cleaning balls
- a 7 mm Allen key
- a tube brush
Réf. EC3034
Cat. MAPCPR
EAN : 3664962043856
Public price
17 490,00 € pre-tax
Description
Special big construction sites set, composed with a spraying machine and a sequential mixer.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The mixer is equipped with a double helical paddle on a horizontal arm which ensures a rapid and homogeneous mixing, a water doser, a speed control and a rotation direction reversing function.
A vibrator is attached to the tank of the machine for a better descent of the product towards the bottom.
The mixer is equipped with a double helical paddle on a horizontal arm which ensures a rapid and homogeneous mixing, a water doser, a speed control and a rotation direction reversing function.
Applications
Wide variety of applicable products including powder and ready-to-use :
With mortar pump and lance: traditional mortars with additives, hydraulic plasters, single-coat paints, lime based plasters, technical & special high-loading fillers, grouting compound...
With E.W.I. pump and lance: glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
With mortar pump and lance: traditional mortars with additives, hydraulic plasters, single-coat paints, lime based plasters, technical & special high-loading fillers, grouting compound...
With E.W.I. pump and lance: glues and E.W.I. coatings, thick plastic coatings, light hydraulic coatings...
Technical characteristics
Product flow-rate
0 to 40 kg/min
Machine motor power
3 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Power supply
230 V - 16 A - 50 Hz
Machine tank capacity
100 L
Integrated vibrator
yes
Mixer motor
2,2 kW
Mixer tank capacity
100 L
Machine dim. (L x w x h)
115 x 65 x 73 cm
Mixer dim. (L x w x h)
129 x 74 x 126 cm
Machine weight
141 kg
Mixer weight
107 kg
Noise level
94 Lwa
With mortar pump and lance
Pump
MAP 6
Product pressure
0 to 20 bar
Maximum grain size
6 mm
With E.W.I. pump and lance
Pump
MAP 7
Product pressure
0 to 50 bar
Maximum grain size
3 mm
Delivered with
- a Ø32 x 20 m air/product hose
- a Ø32 x 20 m air/product extension hose
- a Ø25 x 5 m air/product easy handling hose
- two suspension straps
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- a carry-case containing:
- a Ø32 x 20 m air/product extension hose
- a Ø25 x 5 m air/product easy handling hose
- two suspension straps
- a pressure controller with adapter
- a MAP 6 pump
- a carry-case containing:
- an ABS mortar spray lance
- eight spraying nozzles (Ø8, 10, 12, 14, 16, 18, 20 & 22 mm)
- three grouting nozzles (Ø10, 12 & 14 mm)
- two cleaning balls and a tube brush
- a cleaning brush
- an unplugging brush
- a 7 mm Allen key
- a carry-case containing:
- an aluminium-E.W.I. spraying lance
- an air adjustment kit
- a threaded ring for grouting nozzles
- three grouting nozzles Ø 10, 12 & 14 mm
- four spraying nozzles n°6, 7, 8 & 10
- two cleaning balls
- a 7 mm Allen key
- a tube brush
Product datasheet Options Advice & Documents Exploded viewsOptions
Accessories and consumables
Mortar application
Maintenance and servicing
Product datasheet Options Advice & Documents Exploded viewsAdvice & documents
Product datasheet Options Advice & Documents Exploded viewsExploded views