Hemp spraying set MIXPRO 14-164-E40 & ø 63 lance
Product datasheet 
Advice & DocumentsProduct datasheet
Description
Set designed for insulation, composed of a blowing machine, a continuous mixing machine and a compressor.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 1,5 m3/h.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 1,5 m3/h.
Technical characteristics
BLOWING MACHINE
Electrical supply
230 V / 50 and 60 Hz
Maximum current
16 A
Motor power
0,75 kW
Transmission
by chain
Turbines
5000 L/min - 2 x 1400 W
Electronic control
yes
Pressure
0,3 bar
Flow rate for cellulose wadding
0 to 55 bags/h
Tank capacity
220 L
Suction turbine filter
2
Cooling turbine filter
1
Product hose length
Ø63 x 25 m
Product outlet diameter
63 mm
Inflatable tyres
Ø 300
Wire-guided remote control
25 m - start/stop
Hopper loading width
45 cm
Loading height
122 cm
Dimensions (L x w x h)
116 x 67 x 151 cm
Weight
116 kg
Noise level
100 Lwa
CONTINUOUS MIXING MACHINE
Tank capacity
45 L
Electrical supply
230 V - 50 Hz
Thermal protection
yes
Geared-motor driving mixing arm
1,5 kW
Variable speed
yes
Water pump
yes
Flow-meter
digital display
Water safety switch
yes
Product pressure
0 to 20 bar
Product flow-rate
variable depending on pump used
Rotor/stator
MAP 3
Pouring yield
20 bags of 25 kg/h
Pouring max. hose length
40 m
Loading height
99 cm
Dimensions (L x w x h)
78 x 60 x 148 cm
Weight
82 kg
COMPRESSOR
Rotation speed
1420 RPM
Flow-rate of air absorbed
546 L/min (33 m3/h)
Quantity of oil (crankcase)
1,52 L
Oil consumption
1,4 g/h
Motor power
3 kW
Electrical supply
230 V
Frequency
50 Hz
Current
16 A
Thermal protection
yes
Safety valve
yes
Tank capacity
4,5 L
Maximum pressure
10 bar
Air coupling
quick-connect
Dimensions (L x w x h)
85 x 62 x 76 cm
Weight
67 kg
Noise level
92 Lwa
Delivered with
- a Ø19 x 2 m pouring hose
- a Ø25 x 10 m air/product pipe
- a Ø25 x 15 m air/product extension hose
- a Ø10 x 10 m air extension hose
- a 10 m electric remote control
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter,
- two electric reels, 40 m
- 1 unblocking key
- 1 rotor/stator assembly spray
- a carry-case containing:
- a Ø63 hemp & lime spray lance
- six Ø8 spraying nozzles
- two Ø30 cleaning balls
- two Ø50 cleaning balls
- a cleaning brush
- an unplugging pin
- three Allen keys Ø3, 4 & 7
Réf. EC3050
Cat. MAPCHA
EAN : 3664962062154
Public price
24 000,00 € pre-tax
Description
Set designed for insulation, composed of a blowing machine, a continuous mixing machine and a compressor.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 1,5 m3/h.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 1,5 m3/h.
Technical characteristics
BLOWING MACHINE
Electrical supply
230 V / 50 and 60 Hz
Maximum current
16 A
Motor power
0,75 kW
Transmission
by chain
Turbines
5000 L/min - 2 x 1400 W
Electronic control
yes
Pressure
0,3 bar
Flow rate for cellulose wadding
0 to 55 bags/h
Tank capacity
220 L
Suction turbine filter
2
Cooling turbine filter
1
Product hose length
Ø63 x 25 m
Product outlet diameter
63 mm
Inflatable tyres
Ø 300
Wire-guided remote control
25 m - start/stop
Hopper loading width
45 cm
Loading height
122 cm
Dimensions (L x w x h)
116 x 67 x 151 cm
Weight
116 kg
Noise level
100 Lwa
CONTINUOUS MIXING MACHINE
Tank capacity
45 L
Electrical supply
230 V - 50 Hz
Thermal protection
yes
Geared-motor driving mixing arm
1,5 kW
Variable speed
yes
Water pump
yes
Flow-meter
digital display
Water safety switch
yes
Product pressure
0 to 20 bar
Product flow-rate
variable depending on pump used
Rotor/stator
MAP 3
Pouring yield
20 bags of 25 kg/h
Pouring max. hose length
40 m
Loading height
99 cm
Dimensions (L x w x h)
78 x 60 x 148 cm
Weight
82 kg
COMPRESSOR
Rotation speed
1420 RPM
Flow-rate of air absorbed
546 L/min (33 m3/h)
Quantity of oil (crankcase)
1,52 L
Oil consumption
1,4 g/h
Motor power
3 kW
Electrical supply
230 V
Frequency
50 Hz
Current
16 A
Thermal protection
yes
Safety valve
yes
Tank capacity
4,5 L
Maximum pressure
10 bar
Air coupling
quick-connect
Dimensions (L x w x h)
85 x 62 x 76 cm
Weight
67 kg
Noise level
92 Lwa
Delivered with
- a Ø19 x 2 m pouring hose
- a Ø25 x 10 m air/product pipe
- a Ø25 x 15 m air/product extension hose
- a Ø10 x 10 m air extension hose
- a 10 m electric remote control
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter,
- two electric reels, 40 m
- 1 unblocking key
- 1 rotor/stator assembly spray
- a carry-case containing:
- a Ø63 hemp & lime spray lance
- six Ø8 spraying nozzles
- two Ø30 cleaning balls
- two Ø50 cleaning balls
- a cleaning brush
- an unplugging pin
- three Allen keys Ø3, 4 & 7
Product datasheet Advice & Documents