Hemp spraying set COMPACT-PRO 35-164 & ø 50 lance
Product datasheet 
Advice & DocumentsProduct datasheet
Description
Set designed for insulation, composed of a blowing machine and a spraying machine with sequential mixer.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 3 m3/h.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 3 m3/h.
Technical characteristics
BLOWING MACHINE
Electrical supply
230 V / 50 and 60 Hz
Maximum current
16 A
Motor power
0,75 kW
Transmission
by chain
Turbines
5000 L/min - 2 x 1400 W
Electronic control
yes
Pressure
0,3 bar
Flow rate for cellulose wadding
0 to 55 bags/h
Tank capacity
220 L
Suction turbine filter
2
Cooling turbine filter
1
Product hose length
Ø63 x 25 m
Product outlet diameter
63 mm
Inflatable tyres
Ø 300
Wire-guided remote control
25 m - start/stop
Hopper loading width
45 cm
Loading height
122 cm
Dimensions (L x w x h)
116 x 67 x 151 cm
Weight
116 kg
Noise level
100 Lwa
SPRAYING MACHINE AND MIXER
Product flow-rate
0 to 30 kg/min
Machine motor power
2,2 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Power supply
230 V - 16 A - 50 Hz
Machine tank capacity
100 L
Pump
MAP 6
Product pressure
0 to 20 bar
Maximum grain size
6 mm
Integrated vibrator
yes
Mixer motor
1,1 kW
Mixer tank capacity
70 L
Machine dim. (L x w x h)
130 x 70 x 75 cm
Mixer dim. (L x w x h)
88 x 52 x 57 cm
Machine weight
143 kg
Mixer weight
75 kg
Noise level
96 Lwa
Delivered with
- a Ø32 x 20 m air/product hose
- a Ø25 x 5 m air/product extension hose
- a cleaning slide
- two suspension straps
- a pressure controller with adapter
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter
- two electric reels, 40 m
- an unblocking key
- a rotor/stator assembly spray
- a greasing pump with a grease cartridge
- a Ø51 x 25 m blowing hose
- a Ø50 x 63 nipple
- a Ø63-51 reduction
- a carry-case containing:
- a Ø25 x 5 m air/product extension hose
- a cleaning slide
- two suspension straps
- a pressure controller with adapter
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter
- two electric reels, 40 m
- an unblocking key
- a rotor/stator assembly spray
- a greasing pump with a grease cartridge
- a Ø51 x 25 m blowing hose
- a Ø50 x 63 nipple
- a Ø63-51 reduction
- a carry-case containing:
- a traditional mortar spray lance
- three grouting nozzles (Ø10, 12 & 14 mm)
- eight spray nozzles (Ø8 to 22 mm)
- two Ø30 cleaning balls
- two Ø50 cleaning balls
- a Ø50 hemp & lime spray lance
- six Ø8 spraying nozzles
- two Ø30 cleaning balls
- a cleaning brush
- an unplugging pin
- three Allen keys Ø3, 4 & 7
Réf. EC3051
Cat. MAPCHA
EAN : 3664962082152
Public price
27 980,00 € pre-tax
Description
Set designed for insulation, composed of a blowing machine and a spraying machine with sequential mixer.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 3 m3/h.
It can be used to spray: hemp concrete, lime/hemp plaster, lime/sand finish, etc., with a flow rate of up to 3 m3/h.
Technical characteristics
BLOWING MACHINE
Electrical supply
230 V / 50 and 60 Hz
Maximum current
16 A
Motor power
0,75 kW
Transmission
by chain
Turbines
5000 L/min - 2 x 1400 W
Electronic control
yes
Pressure
0,3 bar
Flow rate for cellulose wadding
0 to 55 bags/h
Tank capacity
220 L
Suction turbine filter
2
Cooling turbine filter
1
Product hose length
Ø63 x 25 m
Product outlet diameter
63 mm
Inflatable tyres
Ø 300
Wire-guided remote control
25 m - start/stop
Hopper loading width
45 cm
Loading height
122 cm
Dimensions (L x w x h)
116 x 67 x 151 cm
Weight
116 kg
Noise level
100 Lwa
SPRAYING MACHINE AND MIXER
Product flow-rate
0 to 30 kg/min
Machine motor power
2,2 kW
Comp. absorbed air flow-rate
366 L/min
Compressor power
2,2 kW
Power supply
230 V - 16 A - 50 Hz
Machine tank capacity
100 L
Pump
MAP 6
Product pressure
0 to 20 bar
Maximum grain size
6 mm
Integrated vibrator
yes
Mixer motor
1,1 kW
Mixer tank capacity
70 L
Machine dim. (L x w x h)
130 x 70 x 75 cm
Mixer dim. (L x w x h)
88 x 52 x 57 cm
Machine weight
143 kg
Mixer weight
75 kg
Noise level
96 Lwa
Delivered with
- a Ø32 x 20 m air/product hose
- a Ø25 x 5 m air/product extension hose
- a cleaning slide
- two suspension straps
- a pressure controller with adapter
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter
- two electric reels, 40 m
- an unblocking key
- a rotor/stator assembly spray
- a greasing pump with a grease cartridge
- a Ø51 x 25 m blowing hose
- a Ø50 x 63 nipple
- a Ø63-51 reduction
- a carry-case containing:
- a Ø25 x 5 m air/product extension hose
- a cleaning slide
- two suspension straps
- a pressure controller with adapter
- a 1"1/4 stainless steel lumps remover
- a 1 mm mesh helical filter
- two electric reels, 40 m
- an unblocking key
- a rotor/stator assembly spray
- a greasing pump with a grease cartridge
- a Ø51 x 25 m blowing hose
- a Ø50 x 63 nipple
- a Ø63-51 reduction
- a carry-case containing:
- a traditional mortar spray lance
- three grouting nozzles (Ø10, 12 & 14 mm)
- eight spray nozzles (Ø8 to 22 mm)
- two Ø30 cleaning balls
- two Ø50 cleaning balls
- a Ø50 hemp & lime spray lance
- six Ø8 spraying nozzles
- two Ø30 cleaning balls
- a cleaning brush
- an unplugging pin
- three Allen keys Ø3, 4 & 7
Product datasheet Advice & Documents